If you experience dropped calls and poor cell phone signal quality in your car, home or office then the Wilson MobilePro Cell Phone Signal Booster kit is the solution. Increasing your cell phone's power by as much as 10 times, the Wilson MobilePro significantly improves the performance of your cellular and data devices by increasing the power output of your cell phone signal where you are experiencing a weak signal. Designed for portability and mobility the MobilePro includes several power adapters, and is easily moved from your vehicle to home, hotel, airport, and office creating an improved cellular signal.
With the MobilePro, you'll experience fewer dropped calls. View larger.
It's All About Power
The primary cause of dropped calls is low signal output power from the cell phone to the cell tower, which limits the phone's ability to communicate with the tower. A typical cell phone provides merely one-fifth of a watt of output power. To address this problem, the amplifier and the included magnet mount antenna work together to increase the phone's output power by as much as 10 times over using just the phone alone.
Enjoy Premium Reception and Fewer Dropped Calls
Living or working in an area with limited cell phone coverage, which is caused by natural and man-made obstructions or by living out of range from a cell phone tower, you know how frustrating weak reception can be. By increasing the power output of your cell phone signal, the Wilson MobilePro helps eliminate most of the signal loss caused by these obstructions. It's important to note, the strongest signal is obtained when the MobilePro is within two feet of your cell phone, laptop or data card. If you sit at a distance greater than two feet, simply set your phone next to the MobilePro booster and use a Bluetooth headset.
The MobilePro comes with several power options, including a vehicle cigarette lighter adapter, a USB power cable, and a standard five-volt AC/DC adapter. The variety of power options ensures that you'll continue to have a boosted signal whether you're driving in your car, traveling with your laptop, or working at your desk. Included with the booster kit is a convenient carrying case that fits neatly inside a briefcase, handbag or suitcase.
Once installed, the MobilePro can simultaneously support multiple cell phones and data cards. You'll experience fewer dropped calls, clearer call quality, and improved data rates--even with 3G technologies.
Installing the MobilePro
Installation is quick and easy; everything you need for installation in a building or car is included in the kit.
Installation in a building takes just a few minutes. View larger.
In a Building
To install, simply attach the suction-cup window bracket to the inside of the window and place the magnet mount antenna on the bracket. Connect the magnet mount antenna to the amplifier. Power the amplifier by using the USB power cord and plugging it into a computer USB port or the standard AC adapter. Place the MobilePro within 12 inches of your phone, laptop, or data card to receive an improved signal.
In a Car
Included mounting hardware simplifies installation in a car. View larger.
To install, simply attach the magnet mount antenna to the roof of your vehicle. Connect the cable of the magnet mount antenna to the amplifier. Mount the amplifier to the dash or other area using the supplied mounting hardware. Power the amplifier using the cigarette lighter adapter, or by plugging the USB cord into your laptop computer. Now you're ready to enjoy a stronger cell phone signal typically within two feet from the amplifier.
Compatible with Most Cell Phone Models and Providers
The Wilson MobilePro is compatible with all US and Canadian cellular providers, excluding iDEN, Nextel, and MIKE. The kit supports CDMA, TDMA, GSM, and AMPS cell phone technologies, as well as data protocols such as GPRS, 1xRTT, HSDPA, EVDO, and EDGE.
Specifications
- Frequency: 824-894 MHz / 1850-1990 MHz
- Gain: 40dB / 42dB
- Max Output Power: 500 mw
- Max RF (downlink): +8dBm
- Noise Figure: 3.5dB nominal
- Flatness: +/-4dB
- Isolation: > 90dB
- Power Requirements: 5V - 8V
- Connectors: SMA Female
- Dimensions: 2 x 4.75 x 1 inches
- Weight: 3 oz
What's in the Box
MobilePro unit, mini magnet-mount antenna, USB power cable, cigarette-lighter power adapter, five-volt AC/DC adapter, two convenient mounting options, and carrying case
No comments:
Post a Comment